Our Products

Best At All




Fastneres
A fastener is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components. Vindhyavasini Enterprises manufactures Fasteners ranging from M6 to M24 in all the lengths and according to the defined industry standards and also on Standard orders.

Special Order fasteners Includes:
1. Anchor Bolts2. U Bolts
3. Anti-Theft Bolts4. Hot Forged Bolts and Nuts
5. Rock Bolts6. Rock Bolts
7. Rivet8. Split Pin
9. Pinch Pin10. Threaded Rods

Flat Washers
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary quite widely. Washers are usually metal or plastic. High-quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied. Vindhyavasini Enterprises manufactures Flat and Pack Washers for all the possible sizes and thickness in MS and High Tensile.

Spring Washeres
A ring split at one point and bent into a helical shape. This causes the washer to exert a spring force between the fastener's head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation. Hence giving the name Spring Washers Vindhyavasini Enterprises manufactures Spring Washers for all the possible sizes and thickness.

G.I Tower Structure
A transmission tower or pylon (also known as an ironman in Australia and a hydro tower in parts of Canada) is a tower used for electric power transmission. It carries the electrical conductors (wires) of high-voltage overhead power lines. Vindhyavasini Enterprises manufactures GI Structure for Tower and poles up to 03 Meter in length with is used in most of the 33/11 KV tower in India.

Foundation Bolts, Special Bolts
We are offering a wide range of Special Foundation Bolts to our valued clients. The product range that we offer our customers is known for its salient features such as dimensional accuracy, wear & tear resistance and longer service life. These tools are widely used for cutting purposes in various industries and sectors. We provide our range as per industry leading price.

High Tensile Nuts & Bolts
We are High Tensile Bolts Manufacturers in India which is made up of a 11% chromium contain by mass and have medium hardenability and show hardened and tempered in the tensile range of 850 - 1000 Mpa. In the High Tensile Bolts customer just be looking for various grade of high tensile bolts like Grade 8.8, 10.9, 12.9. High Tensile Hex Bolts which are widely used in industrial and automobile industries. We known for best High Tensile Stud Manufacturer contain high ammount of strength as comparison with other steels and thus have good corrosion resistance

Rod & pipe Earthing Electrode
The Rod earthing is basically non - treatment earthing. A copper rod of 12.5mm (1/2 inch) diameter or 16mm (0.6in) diameter of galvanized steel or hollow section 25mm (1inch) of GI pipe of length above 2.5m (8.2 ft) are buried upright in the earth manually or with the help of a pneumatic hammer. The length of embedded electrodes in the soil reduces earth resistance to a desired value.